 |
|
 |
|
| |
|
|
| |
| Coarse WDM Reference Table |
Coarse Wavelength Division Multiplexing (CWDM), a WDM technology, is characterized by wider channel
spacing than Dense WDM (DWDM) as defined in ITU-T Rec. G.671. CWDM systems can realize cost-
effective applications, through a combination of uncooled lasers, relaxed laser wavelength selection tolerances
and wide pass-band filters. CWDM systems can be used in transport networks in metropolitan areas for a
variety of clients, services and protocols.
Nominal central wavelengths for coarse WDM systems
The CWDM grid wavelengths within the range 1270 nm to 1610 nm are shown below. The value of "c"
(speed of light in vacuum) that should be used for converting between wavelength and frequency is
2.99792458 x 108 m/s. |
| |
ITU G.694.2 - Nominal central wavelengths
 |
| |
Central wavelength spacing and wavelength variation
Effective CWDM realizations with uncooled lasers and wide passband filters a nominal central wavelength
spacing of not less than 20 nm. Total source wavelength variation of the order of ± 6-7 nm is expected to
be compatible with current filter technologies. As for the guard-band, one third of the minimum channel
spacing is sufficient. Therefore, in order to maximise the number of channels, 20 nm has been chosen.
Specific values and allocations of this variation will be defined in individual applications.
The wavelength variation is determined by mainly two factors. First, the laser manufacturer is allowed a
wavelength variation around the nominal wavelength in order to achieve a higher yield and/or relax fabrication
tolerances. Second, the use of uncooled lasers will cause the wavelength to change with temperature within
the specified temperature range of the laser. |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
